Oil dipstick

Trimmed down the oil dipstick so that it will fit under the cowl. Also got the intake scoop ready for glassing a wall in the back of it. (It was going to be attached to the oil cooler, the cooler didn't fit)

SD-8 Wiring

Finished wiring up all the components for the SD-8 backup alternator.

Wiring

Finished wiring up the lr3c voltage regulator.  Mounted all the components for the sd8 backup alternator.

Wiring

Got half of the wiring for the voltage regulator finished.

Wiring

Finished wiring for starter and alternator feeds.

Ignition timing

Installed and timed magneto and electronic ignition pickup.  Also installed prop (makes it much easier to turn over the engine for timing).

Throttle cable hookup

Finished hooking up and adjusting the throttle cables.